Hydraulic hose In the end is what, used to do what it, hydraulic hoses manufacturers tell you, in fact, it is a kind of hose, generally rubber products, is a common industrial materials, widely used.
Hydraulic hose is also known as hydraulic oil hoses, high-pressure hose, steel wire high-pressure hose, steel wire braided hose, steel wire winding hose, generally divided into steel wire braided hydraulic hose and steel wire winding hydraulic hose, mainly by the liquid-resistant synthetic rubber inner glue layer, medium glue layer, multi-layer reinforcement layer, weather-resistant synthetic rubber external The inner glue layer has the function of carrying the medium, protecting the steel wire or steel wire fiber from erosion, and the outer layer Protection reinforcement layer is not damaged, the reinforcement layer is the skeleton material, the function is to ensure the hose use pressure, the hydraulic hose application is extensive, mainly used in the mine hydraulic support, the oilfield development, applies to the construction, the lifting transportation , Ships, agricultural machinery, a variety of machine tools and a variety of industrial sectors mechanized, automated hydraulic systems are used to transport oil-based liquid transmissions with a certain pressure and temperature, rubber and plastic materials hydraulic hose is also known as rubber tube, is a new type of hose, with obvious corrosion resistance and energy-saving effect.
Of course, due to the wide variety of hoses, the variety of structures, and the use of the environment is very different, so the length of hose life depends not only on the quality, but also on the correct use and maintenance. If you do not pay attention to the following maintenance issues, the service life and quality of the hose will be affected, first of all, hose and hose components can only be used to transport design materials, otherwise it will shorten the service life or failure. Hoses and hose assemblies shall not be used under the minimum bending radius of the hose and shall be avoided bending or bending close to the hose joint, otherwise it will hinder the hydraulic transmission and conveying the material or damage the hose assembly. Hoses and hose assemblies should be kept clean and rinsed internally to prevent foreign objects from entering the cavity, obstructing fluid transmission and damaging the equipment.